SMD-TP Table pick and place Machine
Functions:
SMD-TP Manual placer is composed by the placing mainframe which used to place lamellar diode, triode, 1206.0805 0603 resistor, capacitor and other elements.

Technical parameters：
1. Supply voltage：110-220VAC 50-60HZ(Table pick and place Machine)
2. Total Power：80W
3. Machine head movement: movable range along X direction -400mm
movable range along Y direction --250mm,
4. Nozzle movement: movable range along Z direction---- 10mm
5. Rotation angle of Nozzle:0 ----360°
6. PCB area mounted：370*300mm (Table pick and place Machine)

Configuration
1. The placing mainframe is used to place lamellar diode, triode, 1206.0805 0603 resistor, capacitor and other elements.

(Table pick and place Machine)
Contains: Mainframe
Sliding bar
Placing head
Workbench
Built-in vacuum pump (including speeding picking device)
Nozzle sucking washer 2
Five-groove supporter
Material case
Feet switch
Power cable

SMD-TPJM Table pick and place Machine
Functions：
SMD-TPJM Table pick and place Machine is used to place SOP, QFP, PLCC, BGA and other IC chips.

Technical parameters：
1. Supply voltage:110-220 ac 50-60Hz(Table pick and place Machine)
2. Total Power：300W
3. Working bench: movable range along X direction --50mm,
movable range along Y direction--50mm, angle of rotation ±30o (without fix center of circle)
4. Nozzle movement: movable range along Z direction---- 70mm
5. Rotation angle of Nozzle: 360°
6. PCB area mounted：220*220mm
7. CCD: colourful low light level
8. CRT: 14 inch color TV monitor
9. Magnification is 10 times.

Configuration(Table pick and place Machine)
1. Precision placer is used to place SOP, QFP, PLCC, BGA and other IC chips.
Contains：Translational device with precision optics: 1 set
Sucking pencil 2, sucking washer 2
External vacuum pump 1 (including joint pipe)
2. Color CCD 1
3. Color TV monitor 1 set
4. AC/DC convertor 1
5. Power cable1